Your cart is empty.
Your cart is empty.Product Description
U Shape Design-Better Protect Tires
No lifting - Rollable Design
Foldable Garage Bike Rack
Heavy Duty Bike Wall Hanger
Glacierjay
Thursday, May 29, 2025
It's a bit sturdier than a similar bike hanger I have. The extra feature of the roll-on lip will make it easier to get the bikes on to it. Good garage organization equipment!
Alice Pepper
Monday, March 17, 2025
This is one of the best ways to store bikes if you don't have a lot of floor space or a high ceilinged garage where you could hang them from the ceiling. They install easily into a stud and then hold a lot of weight. No complaints so far!
dg
Friday, February 21, 2025
I picked up the No-Lift Swivel Bike Rack Wall Mount because I wanted to store my wife's e-bike out of the way, but easy to access when when she wants to go for a spin. For myself, I have both an e-bike and a commuting bike, but I mostly ride my e-bike so I figured to use the 2nd rack for the commuting bike. I started with the e-bike and ran into lots of problems.First, the directions say to place the rack on the ground, push the bike against the wall and in the rack, and measure the distance to the top hole. My wife's e-bike did not want to remain in the rack; it kept rolling out of it. I finally managed to steady the bike for a measurement, but it took real work. I thought this was supposed to be easy!The next problem: the instructions say to use an 8mm drill bit to pre-drill the holes when mounting the bike. The instructions also say to use an 8mm drill bit to pre-drill the holes for the anchors when needed. It turns out that 8 mm is too large a hole without the anchors; I ended up using the anchors anyway because the holes were too large without them.Then, there's the deal about placing the bike onto the rack. The vendor page shows a little kid rolling the bike onto the rack with no lifting. Not in my garage! First, there is a 5" concrete base before the wood frame starts, so you're not going to get the bottom plate easily mounted there. I ended up setting the rack above the concrete base, so the bike has to be lifted several inches to get the tire into the rack. But wait! There's more! The e-bike is unbalanced, so the front tire will not stay in the rack; it keeps slipping out. I finally had to place the back tire into the rack to keep the bike stable in position.Finally, the bike does not lay flat against the wall when I rotate the bike. The handle bars and wheel pedals prevent the bike from completely rotating, so it is sticking out into my garage at an awkward angle. I had hoped for a reasonably flat position so I could place a utility table in front of it, but the bike so far out into the garage that there isn't room for the table and my car. One of them has to go...This has been a very frustrating experience. I don't completely blame the bike rack; it might very well be that my wife's e-bike has some weird shape that makes it impossible to use the way I want to. Regardless, this bike rack doesn't work well for me; hopefully it will work better for you.
Saundra18
Sunday, December 15, 2024
Excellent quality that’s easy to put together and hold the weight of the bike well. I’m going to order 3 more of these for my other bikes. So excited to have room in my garage again.
Recommended Products