Your cart is empty.
Your cart is empty.Product Description
Kevin H.
Friday, July 25, 2025
Card works great! Deployed in a QNAP TS-464 - save over half from buying a QNAP branded card, which uses the EXACT same chipset. QNAP discovered it without issue - no need to update drivers or any other changes - plug and play!As for the bracket - QNAP uses a special low profile bracket. This card includes a low profile bracket but doesn't directly fit (even QNAPs card doesn't include the right one - you have to pay another $20 or more for it!). Easy fix - just take the low profile bracket, and where the bracket bends 90 degrees at the top, manually bend it straight. You may also have to shape the top area you bent a little so it fits. Use the blank template cover in your QNAP device as a template. Then simply drill a hole - align with the blank template. Now install and use a self tapping screw - all set. The hole you drill should be small - let the small self tapping screw do the work. Alternatively you can use a TAP set and drill / tap the hole and use a machine screw. Either way, very easy. Alternatively - simply use the blank as a template and 3D print a bracket - easy as well.Great card!
Jonathan DeVega
Thursday, June 26, 2025
can confirm this works with my 2010 Mac Pro 5,1 as well as my 2012 Mac Mini with an external enclosure.
Stephen Campbell
Monday, May 5, 2025
My son bought this. After install he got a fail on boot. After UNinstall, he got a looping BSOD and after 2 days, we're still trying to figure out how to fix this without reinstalling Win10 pro and we're running out of options.It never did reach 10GB speed (got about 2.7gig only when it first worked, one day) then the boot loop happened. If you seriously want to crash your computer, buy this card and spend the next few days struggling to get your PC to boot.Grrrr! now have to reinstall Win10 and reinstall all the software. What a total PAIN!
Jacob
Thursday, April 17, 2025
I have a 10gb network and needed one last card to finish so decided to try this. I already use another Aqtion AQC107 controller so I kind of figured this would be good and so far it's not disappointed. I'm getting close to full throughput and honestly I'm not chasing anything past that. Over all it's a good buy for the money unless you wanna pickup one of the more ancient intel cards.
あまぞんカスタマー
Monday, November 11, 2024
今使っているマザボのPCIeスロットの空きが、Gen4 x1しかなかったため、対応しているこちらを購入Gen4 x1のスペック的に、全二重10Gbpsが動くと思ったが、自分の環境だとそもそも5Gbpsでしかリンクアップしなかった当然Cat6aケーブルを使っているし、ケーブルを変えたり、接続しているスイッチをすぐ近くに持ってきて、1mのケーブルでつないでもダメ設定で10Gbps/Fullで固定しても、そのほかの設定を色々いじってみてもダメx1でリンクしたときは5Gbpsまでという制限でもあるのかもしれないあと、10Gbpsでそもそもリンクアップしないからか、対向のスイッチとのリンク確立も結構遅いx1リンクだと制限がかかるならGen4 x1でリンクするなんてのは罠でしかないが、これが標準の動作なのか、不良なのか、自環境依存の動作なのか情報が無くて全くわからないGen4 x1で10Gbpsで動くのを期待して買う人は一応そこだけ注意かと思う（Gen3 x4≒Gen4 x2なので、Gen4 x1だと5Gbpsで制限されるのはなんとなくおかしくない気はする）
Recommended Products
$1,299.99
$ 99 .00 $99.00
$409.95
$ 99 .00 $99.00