Your cart is empty.
Your cart is empty. Waste Water Pump
▪ Seal: Lip Type
▪ Motor Voltage: 12V DC
▪ Max AMP: 12 A
▪ Open Flow: 12 GPM/45 LPM
▪ Pressure: 15 PSI/1.1Bar
▪ Inlet Port: 3 in/75 mm
▪ Discharge Port: 1 in hose barb
▪ Cord Length: 8.73 ft/2.66 m (easy to connect cigarette lighter)
Sewage Pump Composition
▪ Pure Copper Motor: High precision bearing, low energy consumption, low noise, high speed.
▪ Built-In Thermal Overload Protection: Automatically pauses operation at 15 minutes.
▪ Self-Primming impeller with stainless steel wearplate.
▪ Double Four-Leaf Blades: Crushes solid debris into particles, preventing clogs in sewage lines.
▪ Standard Crushing Water Inlet: It can be connected to a 3in (75mm) hose.
▪ Iron Mounting Plate: Galvanized surface is not easy to rust even under humid environment. Corrosion-resistant and strong oxidation resistant.
▪ Garden Hose Connector: Not shorter than 4 in.With flow control switch. Connected to a water pipe to rinse the residue in the pump.
Using Tips
▪ Manual Churning Function: If the pump stopped working due to the blocked blade, you can open the bottom cover and turn the middle screw with a straight screwdriver to manually mash the blockage.
▪ It's recommended to install a filter on the inlet end. And avoiding the impurities in the liquid, otherwise the water pump will be easily blocked, resulting in a decrease in pressure, flow rate, and even inability to pump water.
Applications
▪ Used on: Deomestic sewage, toilet sewage, kitchen sewage.
▪ Used for: sewage transportation, marine system cleaning and residual water discharge scenarios
Note
▪ Manual measurement, error 1-3mm, depending on the actual situation, please understand.
▪ Please feel free to contact us if you have any questions about the product. We would try our best to solve any problem for you.