Zazolyne Keg Coupler Sankey Keg Tap Dispenser,Commercial Keg Coupler D Tap Kegerator with 304 Stainless Steel Probe, 4 Hose Clamps for I.D 5/16'' Draft Beer Line Gas Tubing
$24.50
$24.50
$
10
.99
$10.99
- Stainless Steel Probe lasts longer and More Sanitary: with a 304 stainless steel probe for 100% stainless steel contact with your beer, provide a solid & sanitary connection for your keg.
- Widely Application:The D-System Sankey Coupler will tap most American or Canadian domestic kegs. Designed for the US Sankey (D System) keg valve, this coupler fits the vast majority of North American beers, including Budweiser, Miller, Coors, Molson, Labatt, Sam Adams, and many more
- Come with Check Valve & Washer -No Leaks:Never causing a mess with the pressure relief valve of our keg tap coupler. It will automatically open on about 53 psi, allows excessive pressure gas to escape before it enters the keg. Beer line washers for creating a seal between the coupler and the barb tailpiece to prevent gas/beer leak
- Easy to Install and Quick Disengage :Pull up the black handle and line the slots on the side of the tavern heard with the tag ends on the keg collar. Turn the coupler clockwise until it stops rotating(usually about a quarter turn). Pull the lever out and push down until the lever locks in place. You now have a tapped keg of beer.Tips: Any quality problem pls tell us first. We will solve it wihtin 24h
- Easy to Connect a Keg Coupler Adapter to a Draft Beer System : First, you’ll need to connect the beer line(use 5/16inch hose fitting) to the top of the coupler, and the red airline (use 5/16inch hose fitting) to the front of the coupler.These connections are locked in with hose clamps (package come with 4 stainless steel hose clamps)
